Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
8. Brake system
9. Body
   9.1. Doors
   9.2. Cowl
   9.3. Back cover (cover of a cargo compartment or hatch)
   9.4. Bumpers
   9.5. Decorative lattice
   9.6. External rear-view mirrors
   9.7. Antenna
   9.8. Salon
      9.8.1. Panels of doors
      9.8.2. Locks of doors
      9.8.3. Glass and window regulator
      9.8.4. Internal rear-view mirror
      9.8.5. Seats
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries


Isuzu Trooper>> Body>> Salon

9.8. Salon

9.8.1. Panels of doors


Panel of a door of the Amigo/MU/Jazz car

Door panel of the Trooper/Bighorn car

1 – armrest

2 – window regulator handle

3 – water filter

Removal and installation

1. Unscrew screws of fastening of armrests.
2. Hook and remove the window regulator handle.
3. Unscrew screws and remove an overlay of the door handle and a decorative slip.
4. Unscrew all screws of fastening of the panel.
5. Hook and wring out the panel from a door framework to get the latches hidden in the panel.
6. Displace the panel vertically up and bring the lower brackets out of gearing with a door framework.
7. If the door is equipped with a window regulator (or the lock) with the electric drive, then for access to wires the panel of a door should be removed first of all. At the same time the panel should not be removed completely, and only to displace to such an extent to provide access to conducting.
8. Before installation remove all latches which remained in a door framework and install them on the panel.
9. Installation is carried out upside-down.