Isuzu Trooper>> Brake system>> Brake disk

8.11. Brake disk

GENERAL INFORMATION

On the Isuzu cars disks of two types are established. Disks of the first type removable, fasten on a nave nuts. These disks are established generally on brakes of back wheels. Disks of the second type non-demountable, are executed with a wheel nave at the same time. To remove such disk, it is necessary to take off a cap, to turn off a nut of a nave and to get the external bearing.

Removal and installation

DISKS OF THE 1ST TYPE

PERFORMANCE ORDER
1. Lift the car and establish on supports.
2. Remove a wheel.
3. Remove a support and an arm.
4. Remove a disk.
5. Installation is carried out upside-down.

DISKS OF THE 2ND TYPE

PERFORMANCE ORDER
1. Lift the car and establish on supports.
2. Remove a wheel.
3. Remove a support and an arm.
4. Remove a dustproof cover, a rasshplintuyta a nave nut. Turn off a nut, remove a washer and get the external bearing.
5. Remove a disk with a nave and the internal bearing.
6. If the disk is ground, then get the internal bearing. Before installation carefully wash out a nave.
7. Installation is carried out upside-down. Adjust bearings and replace the forelock.