Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
   7.1. Forward suspension bracket
   7.2. Angles of installation of wheels
   7.3. Back suspension bracket
   7.4. Steering
      7.4.1. A steering wheel without safety cushion
      7.4.2. A steering wheel with a safety cushion
      7.4.3. The switch of the index of turn (the combined switch)
      7.4.4. Key of the switch of ignition and lock of blocking of a wheel
      7.4.5. Lock of blocking of a wheel
      7.4.6. Steering column
      7.4.7. Steering drafts
      7.4.8. Steering mechanism
      7.4.9. The steering mechanism with the hydraulic booster
      7.4.10. Pump of the hydraulic booster
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries





Isuzu Trooper>> Suspension bracket and steering>> Steering>> Steering mechanism

7.4.8. Steering mechanism

GENERAL INFORMATION

Steering details (cars with a formula 4х4)

1 – nut
2 – bolt
3 – shock-absorber
4 – nut
5 – bipod nut
6 – nut of the pendular lever
7 – average draft

Rack steering mechanism

1 – cardan hinge of a steering column
2 – lock-nut
3 – epiploon
4 – leading shaft
5 – spring ring
6 – dustproof covers
7 – lock ring
8 – tip of side draft
9 – lock-nut
10 – spring ring
11 – spring ring
12 – dustproof covers
13 – lock ring
14 – internal draft
15 – rubber plug
16 – case
17 – bearing holder
18 – expansion spring
19 – adjusting screw
20 – lock-nut

Adjusting tags of the steering mechanism

1 – adjusting tags

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Lift the car and establish on supports.
3. Remove a towing plate (if it is provided).
4. Turn off a bipod nut, remove a washer.
5. Put tags of mutual orientation of a bipod and a shaft.
6. Press a bipod from a shaft.
7. Turn out a bolt of fastening of the coupling of a steering shaft to the steering mechanism.
8. Turn off bolts of fastening of the steering mechanism to the chassis and remove the steering mechanism.

Installation

PERFORMANCE ORDER
1. Install the steering mechanism into place and wrap bolts.
2. Wrap a bolt of fastening of the coupling of a steering shaft to the steering mechanism, tighten a bolt with m 40–49 N.' moment.
3. Tighten bolts of fastening of a steering column with m 17 N.' moment.
4. Establish a bipod on a shaft and tighten a nut with m 196–236 N.' moment.
5. Establish a towing plate (if it is provided).
6. Lower the car.

Adjustment

PERFORMANCE ORDER
1. Establish forward wheels in the provision of driving on a straight line.
2. Release a lock-nut of the adjusting screw of the steering mechanism.
3. Rotate the adjusting screw clockwise to increase a side play, or counterclockwise to reduce.
4. Adjust a side play of a steering wheel within 10–30 mm and tighten a lock-nut with m 37–47 N.' moment.