Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
   7.1. Forward suspension bracket
   7.2. Angles of installation of wheels
   7.3. Back suspension bracket
   7.4. Steering
      7.4.1. A steering wheel without safety cushion
      7.4.2. A steering wheel with a safety cushion
      7.4.3. The switch of the index of turn (the combined switch)
      7.4.4. Key of the switch of ignition and lock of blocking of a wheel
      7.4.5. Lock of blocking of a wheel
      7.4.6. Steering column
      7.4.7. Steering drafts
      7.4.8. Steering mechanism
      7.4.9. The steering mechanism with the hydraulic booster
      7.4.10. Pump of the hydraulic booster
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries





Isuzu Trooper>> Suspension bracket and steering>> Steering>> The switch of the index of turn (the combined switch)

7.4.3. The switch of the index of turn (the combined switch)

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. In a back part of a steering wheel unscrew the screw of a cover of a sound signal and uncover, having lifted vertically up.
3. Turn off a nut of a steering wheel.
4. Apply on a steering shaft and a wheel of a tag of mutual orientation that at assembly not to violate the initial provision of a wheel.

Prevention

At removal of a wheel it is forbidden to strike blows to a steering shaft.


5. Remove a steering wheel a special stripper.
6. Remove a contact ring.
7. Remove both casings of a steering column.
8. Disconnect the socket from the switch of the index of turn.
9. Unscrew screws of fastening of the switch to a steering column and remove the switch.

Installation

PERFORMANCE ORDER
1. Install the switch on a steering column and wrap screws.
2. Attach the socket to the switch.
3. Establish both casings of a steering column.
4. Establish a contact ring.
5. Establish a steering wheel on the tags put when dismantling.
6. Establish a cover of a sound signal and wrap the screw.
7. Connect the battery to weight.