Isuzu Trooper>> Suspension bracket and steering>> Angles of installation of wheels

7.2. Angles of installation of wheels

GENERAL INFORMATION

Prevention

Not always violation of angles of installation of wheels is the reason of unsatisfactory work of steering. At first check pressure in tires and a condition of details of a forward suspension bracket.


DISORDER OF WHEELS

Adjustment of disorder of wheels

1 – to a forward part of the car

2 – chassis

3 – package of adjusting washers

The corner of disorder of wheels is regulated by selection of packages of the lamellar adjusting washers established between axes of levers of a suspension bracket and the chassis.

CORNER OF THE LONGITUDINAL INCLINATION OF THE AXIS OF TURN

Adjustment of a corner of a longitudinal inclination of an axis of turn

1 – to a forward part of the car

2 – packages of adjusting washers

3 – chassis

4 – packages of adjusting washers

The corner of a longitudinal inclination of an axis of turn is regulated by selection of a separate package of the washers established on forward and back bolts of fastening of levers between axes of levers of a suspension bracket and the chassis. The corner changes by increase or reduction of thickness of a package of washers on forward or back bolts.

The corner of a longitudinal inclination of an axis of turn is regulated after adjustment of disorder of wheels.

CORNER OF THE CONVERGENCE OF WHEELS

Adjustment of a corner of a convergence of wheels

 

The corner of a convergence of wheels on all cars is regulated by change of length of steering draft.

PERFORMANCE ORDER
1. Weaken nuts and rotate draft.
2. After adjustment tighten nuts.
3. On cars with rack steering be convinced that rubber covers were not overwound.

CLEARANCE OF THE CAR

Adjustment of clearance

1 – cross-piece

2 – view from the party of a forward part of the car

3 – lower spherical hinge

The clearance is regulated by rotation of an adjusting bolt of the torsion.
Prevention

The excessive or insufficient inhaling of adjusting bolts of the torsion is forbidden. At excessive twisting the torsion can break that at the movement is extremely dangerous.


Angles of installation of wheels

Year of release
Brand
Disorder corner, °
Corner of a longitudinal inclination of an axis of turn, °
Range
Prefer -
telny value
Range
Prefer -
telny value
1984-1986
Trooper/Bighorn
0 – 1 (P)
0,5 (P)
0,067 – 1,07 (P)
0,603 (P)
1987-1991
Trooper/Bighorn
2 – 3 (P)
2,5 (P)
0 – 1 (P)
0,5 (P)
1989-1995
Amugo/MU/Jazz
1,75 – 3,75 (P)
2,5 (P)
0,5 (N) – 1,5 (P)
0,5 (P)
1991-1995
Amugo/MU/Jazz
2 – 3 (P)
2,5 (P)
0 – 1 (P)
0,5 (P)

Year of release
Brand
Corner of a convergence of wheels, mm
Angle of rotation of wheels, °
1984-1986
Trooper/Bighorn
1,98
7,1
1987-1991
Trooper/Bighorn
0 – 3,96
10
1989-1995
Amugo/MU/Jazz
0 – 4,76
10
1991-1995
Amugo/MU/Jazz
0 – 3,96
10