Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
   7.1. Forward suspension bracket
      7.1.1. Torsion
      7.1.2. Shock-absorbers of a forward suspension bracket
      7.1.3. Top spherical support
      7.1.4. Lower spherical support
      7.1.5. Stabilizer
      7.1.6. Bars of racks
      7.1.7. Top levers of a suspension bracket
      7.1.8. Lower levers of a suspension bracket
      7.1.9. Pin
      7.1.10. Naves of forward wheels
   7.2. Angles of installation of wheels
   7.3. Back suspension bracket
   7.4. Steering
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries





Isuzu Trooper>> Suspension bracket and steering>> Forward suspension bracket>> Lower levers of a suspension bracket

7.1.8. Lower levers of a suspension bracket

GENERAL INFORMATION

Cm. rice. A rack of a pin and levers of a suspension bracket (cars with a formula 4х2) and rice. A rack of a pin and levers of a suspension bracket (cars with a formula 4х4).

Removal

PERFORMANCE ORDER
1. Lift the car and establish on supports.
2. Remove wheels.
3. Remove bars of racks. For this purpose turn off nuts and remove an arm from the chassis, turn off a nut and a lock-nut, get rubber plugs and disconnect a bar.
4. Disconnect draft of the stabilizer of cross stability from the lower lever.
5. Remove the torsion.
6. Disconnect the shock-absorber from the lower lever.
7. Disconnect the spherical hinge from the lower lever of a suspension bracket.
8. Turn off a nut and a mandrel from soft metal to a vypressuyta an axis of the lower lever.

Installation

PERFORMANCE ORDER
1. Collect the spherical hinge with the lower lever, tighten bolts with m 45 N.' moment.
2. Press an axis and install the lower lever on the chassis. At a press fitting do not damage a shlitsevy part of an axis. Tighten axis nuts with m 200 N.' moment.
3. Attach the torsion to the lower lever.
4. Put on the plug and a washer a rack bar and insert a bar into a chassis arm.
5. Put on the second plug, install a cup, a kontryashchy washer and wrap a nut. Not to tighten a nut.
6. Install a rack bar on the lower lever and tighten bolts with m 45 N.' moment.
7. Attach a carving part of the hinge to a pin rack.
8. Establish a wheel and lower the car.
9. Lower the car and tighten the first nut of fastening of a bar of a rack with m 210 N.' moment, and the second nut – with m 67 N.' moment.