Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
   7.1. Forward suspension bracket
      7.1.1. Torsion
      7.1.2. Shock-absorbers of a forward suspension bracket
      7.1.3. Top spherical support
      7.1.4. Lower spherical support
      7.1.5. Stabilizer
      7.1.6. Bars of racks
      7.1.7. Top levers of a suspension bracket
      7.1.8. Lower levers of a suspension bracket
      7.1.9. Pin
      7.1.10. Naves of forward wheels
   7.2. Angles of installation of wheels
   7.3. Back suspension bracket
   7.4. Steering
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries

Isuzu Trooper>> Suspension bracket and steering>> Forward suspension bracket>> Top levers of a suspension bracket

7.1.7. Top levers of a suspension bracket


Rack of a pin and levers of a suspension bracket (cars with a formula 4х2)

1 – nut and forelock
2 – nut and forelock
3 – nut and forelock
4 – tip of steering draft
5 – pin rack
6 – top spherical hinge
7 – bolt and plate
8 – lever axis nuts
9 – top lever
10 – nut and washer
11 – plug
12 – lever axis
13 – lower spherical hinge
14 – bolt, nut and washer
15 – lower lever
16 – plug

Rack of a pin and levers of a suspension bracket (cars with a formula 4х4)

1 – forward plug
2 – back plug
3 – lower lever of a suspension bracket
4 – torsion lever
5 – bolt
6 – nut and washer
7 – bolt
8 – nut and washer
9 – lower spherical hinge
10 – lever axis
11 – plug
12 – washer
13 – nut
14 – top lever
15 – plates for adjustment of a longitudinal inclination of an axis of turn
16 – plates for adjustment of disorder of wheels
17 – bolt and plate
18 – lever axis nuts
19 – top spherical hinge
20 – needle bearing
21 – washer
22 – epiploon
23 – pin assembled
24 – nut and forelock
25 – nut and forelock
26 – brake board




On a part of cars the top lever is removed assembled with the spherical hinge.

1. Lift the car and carefully lower on the lower levers.
2. Remove wheels.
3. Rasshplintuyte also turn off a koronchaty nut of the hinge, disconnect the lever from a pin rack.


Tie a pin a wire to a frame, do not allow sagging of a pin on a brake hose.

4. Turn off bolts of fastening of an axis of the top lever to an arm and remove the lever, having paid attention to quantity and an arrangement of packages of adjusting washers. Packages of washers are intended for adjustment of disorder of wheels and a tilt angle of an axis of turn. At assembly install packages of washers on former places.
5. Turn off nuts of an axis of the lever and remove an axis.


1. Establish covers on a lever axis.
2. Put jellied lubricant in rubber plugs and screw plugs on a lever axis. Navorachivayte the left and right plugs in turn, avoiding hit of lubricant on the external surfaces of plugs.
3. Tighten nuts with m 300 N.' moment.


Make sure that the lever and plugs are centered. After an inhaling of nuts the lever has to turn smoothly with a notable resistance, but without jamming.

4. Screw butterdishes and grease details with the syringe.
5. Establish a carving tip in an eye of a pin and tighten a koronchaty nut with m 90 N.' moment. Tighten a nut to install the forelock. Replace the forelock.
6. Install the lever on the chassis, having tracked safety of packages of adjusting washers. Tighten lever axis nuts with m 45 N.' moment.


Tighten nuts on packages of washers of smaller thickness first of all.

7. Establish a dustproof cover.
8. Establish wheels and lower the car.