Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
   7.1. Forward suspension bracket
      7.1.1. Torsion
      7.1.2. Shock-absorbers of a forward suspension bracket
      7.1.3. Top spherical support
      7.1.4. Lower spherical support
      7.1.5. Stabilizer
      7.1.6. Bars of racks
      7.1.7. Top levers of a suspension bracket
      7.1.8. Lower levers of a suspension bracket
      7.1.9. Pin
      7.1.10. Naves of forward wheels
   7.2. Angles of installation of wheels
   7.3. Back suspension bracket
   7.4. Steering
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries

Isuzu Trooper>> Suspension bracket and steering>> Forward suspension bracket>> Bars of racks

7.1.6. Bars of racks



1. Lift the car and establish on supports.
2. Remove a cross bar.
3. Turn off a lock-nut and a nut from the termination of a rack.
4. Turn off bolts of fastening of a rack to the lower lever and remove a rack.


1. Wrap bolts and nuts of fastening are resistant.
2. Tighten nuts And yes In before obtaining the necessary size.
3. On cars with a formula 4х2 the nut And drags on with m 78–98 N.' moment, the mm C=30,5-32,5 size.
4. On cars with a formula 4х4 the nut And drags on with m 20 N.' moment, a nut In – with m 55–81 N.'s moment, the mm C=36,0-38,0 size.
5. Tighten lock-nuts with m 108 N.' moment.
6. Establish wheels and lower the car.