Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
   7.1. Forward suspension bracket
      7.1.1. Torsion
      7.1.2. Shock-absorbers of a forward suspension bracket
      7.1.3. Top spherical support
      7.1.4. Lower spherical support
      7.1.5. Stabilizer
      7.1.6. Bars of racks
      7.1.7. Top levers of a suspension bracket
      7.1.8. Lower levers of a suspension bracket
      7.1.9. Pin
      7.1.10. Naves of forward wheels
   7.2. Angles of installation of wheels
   7.3. Back suspension bracket
   7.4. Steering
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries





Isuzu Trooper>> Suspension bracket and steering>> Forward suspension bracket>> Torsion

7.1.1. Torsion

GENERAL INFORMATION

Places of lubricant of the torsion at assembly

Places of lubricant are specified by shooters.

CARS WITH the FORMULA 4х4

Removal

PERFORMANCE ORDER
1. Lift the car and establish on supports.
2. Turn out a bolt of adjustment of clearance from the lever.
3. Put tags and remove the lever from the torsion and the 3rd cross-piece.
4. Apply on tags and remove the torsion from the lower lever of a suspension bracket.

Installation

PERFORMANCE ORDER
1. Plentifully grease the shlitsevy terminations of the torsion.
2. Raise the car, having substituted a jack under the lower lever, and press rubber buffers to the lever.
3. Enter a forward part of the torsion into an opening of the lower lever.
4. Install the lever of adjustment of clearance in such situation that
the termination of the lever appeared near an adjusting bolt. Grease with jellied lubricant that part of the adjusting lever which fastens on a frame.
5. Insert the new forelock into the adjusting lever.
6. Wrap an adjusting bolt to the tag put when dismantling.
7. Lower the car and check clearance.