Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
   6.1. Manual transmission
   6.2. Automatic transmission
   6.3. Running gear
      6.3.1. Forward driveshaft, half shafts and CV JOINTS
      6.3.2. Internal CV JOINT
      6.3.3. Removal and installation of the forward driveshaft
      6.3.4. Dismantling of cardan hinges
      6.3.5. Back driveshaft
      6.3.6. Average support
      6.3.7. Zadny Bridge
         6.3.7.1. Details of the back bridge
         6.3.7.2. Removal and installation of the back bridge
      6.3.8. Forward leading bridge
7. Suspension bracket and steering
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries





Isuzu Trooper>> Transmission and running gear>> Running gear>> Zadny Bridge>> Details of the back bridge

6.3.7.1. Details of the back bridge

GENERAL INFORMATION

Details of the back bridge
1 – a reducer of the back bridge assembled with the main transfer and differential
2 – bolts
3 – laying
4 – drain stopper
5 – stopper of a control otverstviye
6 – сапун
7 – coupling bolt
8 – epiploon
9 – adjusting laying
10 – samopodzhimny nut
11 – washer
12 – half shaft bearing
13 – holder of the bearing
14 – epiploon
15 – half shaft
16 – wheel hairpin
17 – drum
18 – wheel nut
19 – a bolt of fastening of a drum to a half shaft flange

HALF SHAFTS

Snyatiye installation


PERFORMANCE ORDER
1. Lift the car.
2. Remove a back wheel and the brake drum.
3. Turn off 4 bolts of fastening of a plate of the bearing of a half shaft.
4. Get a half shaft a shock stripper.
5. Installation of a half shaft is carried out upside-down.
6. Tighten bolts with the moment (68–81 N. of m).

ZADNY BRIDGE REDUCER EPIPLOON

Removal

PERFORMANCE ORDER
1. Lift the car.
2. Put orientation tags and remove the driveshaft.
3. Check the moment of resistance to a provorachivaniye of a nut of the leading gear wheel of the main transfer. At assembly the nut should be tightened so that the moment of resistance to a provorachivaniye remained.
Prevention

The moment of resistance to a provorachivaniye of a nut of the leading gear wheel has to be 27–40 N. in m.


4. Turn off a nut of the leading gear wheel and remove a washer.
5. Remove a flange of the leading gear wheel.
6. Hook and get an epiploon.
7. Clear and examine the condensed surface and the surface of boring under an epiploon in the reducer case.

Installation

PERFORMANCE ORDER
1. Press in the reducer case a new epiploon so that the plane of an epiploon appeared aflush with the reducer case.
2. After installation of an epiploon it is necessary to install a tightness in bearings of the leading gear wheel.
3. For this purpose tighten a nut of the leading gear wheel so that the moment of resistance to a nut provorachivaniye remained. At an inhaling of a nut hold a flange.
4. Install the driveshaft, having combined the tags put when dismantling.
5. Check oil level in a case of the back bridge.

HALF SHAFT EPIPLOON

Removal

PERFORMANCE ORDER
1. Lift the car.
2. Get a half shaft.
3. Turn off a nut of the holder of the bearing.
4. Remove from a half shaft the bearing, the holder and an epiploon.
5. An epiploon from the holder also establish to Vypressuyta new.

Installation

PERFORMANCE ORDER
1. Tighten a nut with the moment (250–275 N. of m).
2. Check oil level in a case of the back bridge.

PEREDNY BRIDGE REDUCER

Removal

PERFORMANCE ORDER
1. Lift the car and establish on supports.
2. Merge oil from the forward bridge.
3. Put orientation tags remove the forward driveshaft.
4. Remove half shafts.
5. Turn off bolts and remove a reducer.

Installation

PERFORMANCE ORDER
1. Replace laying and establish a reducer.
2. Fill in oil.

ZADNY BRIDGE REDUCER

Removal and installation

PERFORMANCE ORDER
1. Lift the car and establish on supports.
2. Merge oil from the back bridge.
3. Put orientation tags remove the back driveshaft.
4. Remove half shafts.
5. Turn off bolts and remove a reducer.
6. Replace laying and establish a reducer.
7. Fill in oil.