Isuzu Trooper>> Transmission and running gear>> Running gear>> Removal and installation of the forward driveshaft

6.3.3. Removal and installation of the forward driveshaft

GENERAL INFORMATION

AMIGO/MU/JAZZ, RODEO/PASSPORT AND TROOPER/BIGHORN CARS

The forward driveshaft of the 6-cylinder engine with mechanical and automatic transmission and the engine 4ZE1


1 – the forward driveshaft of the engine with mechanical transmission
2 – the forward driveshaft of the engine with automatic transmission
3 – forward driveshaft of the engine 4ZE1

Removal

PERFORMANCE ORDER
1. Lift the car and establish on supports.
2. Put tags of mutual orientation of flanges of the driveshaft on the transfer case and on a flange of the leading gear wheel of the main transfer.
3. Remove the driveshaft of the forward bridge for what turn off bolts of a shlitsevy flange of a fork of the cardan hinge and remove a forward shaft from the transfer case. Do not allow loss of a flange from a shaft of the transfer case.
4. Turn off bolts of fastening of a flange of the cardan hinge to a flange of the leading gear wheel of the main transfer and remove the driveshaft.

Installation

PERFORMANCE ORDER
1. Combine tags on flanges of a shaft, the transfer case and the main transfer.
2. Tighten bolts of fastening of a flange of the cardan hinge to a flange of the leading gear wheel of the main transfer.
3. Tighten bolts of fastening of a flange of the cardan hinge to a flange of a shaft of the transfer case.
4. Lower the car.