Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
   6.1. Manual transmission
   6.2. Automatic transmission
      6.2.1. Transmission case pallet
      6.2.2. Adjustment of a cable of the drive of a butterfly valve
      6.2.3. Adjustment of a cable of the choice of transfers
      6.2.4. Adjustment of the blocking switch
      6.2.5. Removal and installation of automatic transmission
      6.2.6. Transfer case
      6.2.7. Definition of malfunction of the back bridge
      6.2.8. The transfer case with side configuration on transmission
   6.3. Running gear
7. Suspension bracket and steering
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries





Isuzu Trooper>> Transmission and running gear>> Automatic transmission>> The transfer case with side configuration on transmission

6.2.8. The transfer case with side configuration on transmission

GENERAL INFORMATION

TROOPER/BIGHORN CARS

Details of the transfer case with side configuration (Trooper/Bighorn cars)

1 – spring and ball of a clamp
2 – caps
3 – caps
4 – rod
5 – coulisse and fork of shutdown of one leading bridge
6 – rod
7 – fork of inclusion of a demultiplicator
8 – the directing pin
9 – shaft of an intermediate gear wheel
10 – needle bearing and intermediate gear wheel

11 – persistent washer
12 – persistent washer
13 – cover of a shaft of selection of power of the forward bridge
14 – remote washer
15 – shaft of selection of power of the forward bridge
16 – the conducted gear wheel of a forward shaft of selection of power
17 – bearings
18 – bearings


Removal of a rod and intermediate gear wheel from the transfer case with side configuration (Trooper/Bighorn cars)


Dismantling

PERFORMANCE ORDER
1. Remove balls and springs of clamps.
2. Turn out caps.
3. Turn out other caps.
4. Remove a rod.
5. Get a fork and the coulisse of inclusion of the second leading bridge.
6. Remove a pin and remove a rod.
7. Remove a fork of inclusion of a demultiplicator.
8. Get the directing pin.
9. Remove a shaft of an intermediate gear wheel.
10. Remove an intermediate gear wheel and needle bearings.
11. Remove persistent washers.
12. Remove washers.
13. Uncover a forward shaft of selection of power.
14. Remove the remote plug.
15. Remove a shaft.
16. Remove a gear wheel of a shaft of selection of power.
17. Remove forward and back bearings.

Assembly

PERFORMANCE ORDER
1. Install forward and back bearings.
2. Establish a gear wheel of a shaft of selection of power.
3. Establish a forward shaft of selection of power.
4. Install the remote plug.
5. Establish a cover of a forward shaft.
6. Establish persistent washers.
7. Establish an intermediate gear wheel and needle bearings.
8. Establish a shaft of an intermediate gear wheel.
9. Establish the directing pin.
10. Establish a fork of inclusion of a demultiplicator.
11. Establish a fork rod.
12. Establish a fork, the coulisse and a rod of inclusion of the second leading bridge.
13. Wrap caps.
14. Establish balls and springs of clamps.