Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
   6.1. Manual transmission
   6.2. Automatic transmission
      6.2.1. Transmission case pallet
      6.2.2. Adjustment of a cable of the drive of a butterfly valve
      6.2.3. Adjustment of a cable of the choice of transfers
      6.2.4. Adjustment of the blocking switch
      6.2.5. Removal and installation of automatic transmission
      6.2.6. Transfer case
      6.2.7. Definition of malfunction of the back bridge
      6.2.8. The transfer case with side configuration on transmission
   6.3. Running gear
7. Suspension bracket and steering
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries





Isuzu Trooper>> Transmission and running gear>> Automatic transmission>> Adjustment of a cable of the choice of transfers

6.2.3. Adjustment of a cable of the choice of transfers

PERFORMANCE ORDER
1. Weaken an inhaling of lock-nuts of draft that the pin could slide freely on draft.
2. Turn a shaft of management on transmission counterclockwise (if to look on the left side of transmission), move a shaft to the 3rd emphasis back and establish in neutral situation.
3. Holding a shaft in such situation, transfer the transmission selector to situation N.
4. Take away the lever of transmission and the selector back, thereby having chosen a free wheeling of a cable. Tighten lock-nuts.
5. Check work of transmission on all modes.
Cars of 1988-1990.
6. Weaken an inhaling of lock-nuts of draft.
7. Displace the transmission lever back to the full.
8. Return the lever to situation N.
9. Slightly displace the selector towards the range of R and tighten lock-nuts.