Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
   6.1. Manual transmission
   6.2. Automatic transmission
      6.2.1. Transmission case pallet
      6.2.2. Adjustment of a cable of the drive of a butterfly valve
      6.2.3. Adjustment of a cable of the choice of transfers
      6.2.4. Adjustment of the blocking switch
      6.2.5. Removal and installation of automatic transmission
      6.2.6. Transfer case
      6.2.7. Definition of malfunction of the back bridge
      6.2.8. The transfer case with side configuration on transmission
   6.3. Running gear
7. Suspension bracket and steering
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries

Isuzu Trooper>> Transmission and running gear>> Automatic transmission>> Transmission case pallet

6.2.1. Transmission case pallet

Removal and installation

1. Disconnect the battery from weight, lift the car and establish on supports.
2. Establish a support under transmission. Turn off bolts and nuts of fastening of a stretcher of transmission, displace a stretcher back so that a tail part of a shaft leaned on it.
3. Turn off several bolts of fastening of the pallet, release other bolts so that liquid merged in the substituted pallet.

On some cars the drain stopper which moment of an inhaling of 40 N. of m is provided.

4. After a drain of all liquid turn out bolts and remove the pallet.
5. Turn off bolts and remove the filter of transmission liquid.
6. Install the new filter, wrap bolts. Tighten bolts with m 7 N.' moment.
7. Remove the consolidation material remains from the demountable planes of the pallet and a case of transmission. Remove a magnet and clear. Wash out the pallet solvent and dry.
8. Apply sealant on the demountable plane of the pallet and install the pallet. Tighten bolts with m 7–14 N.' moment.

Replacement of the filter

After removal of the pallet remove holders of the filter. After a drain of the remained liquid establish the new filter and holders.