Isuzu Trooper>> Fuel system>> Removal and installation of the pump mounted in the fuel tank

5.5. Removal and installation of the pump mounted in the fuel tank

GENERAL INFORMATION

Prevention

Strictly observe the order of works described below, otherwise creation of a fire-dangerous situation is possible.


Removal

PERFORMANCE ORDER
1. Depressurize fuel system and disconnect the battery from weight.
2. Lift the car and establish on supports. Merge fuel from a tank. Unscrew screws and remove the lower guards (if are provided).
3. Disconnect all wires and hoses of a fuel pipe.
4. Remove a pipe of a jellied mouth and an arm.
5. Disconnect a ventilating hose.
6. Disconnect a hose of system of catching of vapors of gasoline. Substitute a prop under a tank and lay a board.
7. Turn off bolts and remove a tank. Disconnect a hose from the pump to the fuel filter.
8. Remove the fuel pump assembled with an arm.
9. Remove an arm, a pillow and the filter.

Installation

PERFORMANCE ORDER
1. Collect the pump with an arm, a pillow and the filter.
2. Install the fuel pump assembled with an arm.
3. Install a tank, wrap bolts of coupling tapes of a tank. Tighten bolts.
4. Attach a hose of system of catching of vapors of gasoline.
5. Attach a pipe of a jellied mouth, establish an arm.
6. Attach all wires and hoses of a fuel pipe. Establish the lower guards.
7. Lower the car, fill in gasoline, be convinced of lack of a leak.
8. Connect the battery to weight.