Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
3. Engines
   3.1. Specifications of the engine and adjusting works
   3.2. Electric equipment and capital repairs of engines
   3.3. Diesel engine 2,8 liters
      3.3.1. Introduction
      3.3.2. Technical characteristics
      3.3.3. Check of a compression
      3.3.4. Top dead point of the piston No. 1 (BMT)
      3.3.5. Gaps of valves
      3.3.6. Cover of a head of cylinders
      3.3.7. Pulley of a bent shaft
      3.3.8. Casings of a gear belt of the drive of the camshaft
      3.3.9. Gear belt of the drive of the camshaft
      3.3.10. Asterisks of a gear belt, natyazhitel and intermediate pulleys
      3.3.11. Yokes and pushers
      3.3.12. Head of the block of cylinders
      3.3.13. Oil case
      3.3.14. Oil pump
      3.3.15. Oil heater
      3.3.16. Epiploons of the camshaft and bent shaft
      3.3.17. Flywheel
      3.3.18. Fastenings of the engine / transmission
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries





Isuzu Trooper>> Engines>> Diesel engine 2,8 liters>> Pulley of a bent shaft

3.3.7. Pulley of a bent shaft

Removal

PERFORMANCE ORDER
1. Remove the cooling fan and joints.
2. Take off auxiliary driving belts.
3. Weaken and unscrew four bolts fixing a pulley of a bent shaft to its plug and remove a pulley.
4. If the adjusting pin of a pulley is fixed not rigidly, remove it and postpone together with a pulley.

Installation

PERFORMANCE ORDER
1. Check that the adjusting pin was inserted into the nest, then establish a pulley, having combined it with a pin.
2. Establish four fixing bolts and reliably tighten them.
3. Establish auxiliary driving belts.
4. Install the fan of cooling of a radiator.