Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
3. Engines
   3.1. Specifications of the engine and adjusting works
   3.2. Electric equipment and capital repairs of engines
      3.2.1. Electric equipment of engines
         3.2.1.1. Ignition coil
         3.2.1.2. Ignition block
         3.2.1.3. The induction sensor of ignition for V6 engines
         3.2.1.4. Ignition distributor
         3.2.1.5. System of a charge of the battery
         3.2.1.6. System of launch of the engine
            3.2.1.6.1. Rechargeable battery
            3.2.1.6.2. Starter
            3.2.1.6.3. Traction relay of a starter
            3.2.1.6.4. A starter without reducer
            3.2.1.6.5. A starter with a reducer
      3.2.2. Capital repairs of engines
   3.3. Diesel engine 2,8 liters
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries





Isuzu Trooper>> Engines>> Electric equipment and capital repairs of engines>> Electric equipment of engines>> System of launch of the engine>> Traction relay of a starter

3.2.1.6.3. Traction relay of a starter

Replacement

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove a starter.
3. Disconnect a wire of the traction relay from a starter.
4. Turn off bolts of fastening and remove the traction relay. Get a torsion spring from the relay (if it is provided). On some starters it can be necessary for removal of the traction relay to turn off and get coupling bolts.
5. Install the traction relay and adjusting laying.
6. Tighten bolts with m 20 N.' moment.
7. Connect a wire of the traction relay to a starter.
8. Establish coupling bolts (if acted).
9. Establish a starter and laying (if are provided). Attach wires and a cable from the battery.
10. Check work of a starter.