Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
3. Engines
   3.1. Specifications of the engine and adjusting works
   3.2. Electric equipment and capital repairs of engines
      3.2.1. Electric equipment of engines
         3.2.1.1. Ignition coil
         3.2.1.2. Ignition block
         3.2.1.3. The induction sensor of ignition for V6 engines
         3.2.1.4. Ignition distributor
         3.2.1.5. System of a charge of the battery
         3.2.1.6. System of launch of the engine
            3.2.1.6.1. Rechargeable battery
            3.2.1.6.2. Starter
            3.2.1.6.3. Traction relay of a starter
            3.2.1.6.4. A starter without reducer
            3.2.1.6.5. A starter with a reducer
      3.2.2. Capital repairs of engines
   3.3. Diesel engine 2,8 liters
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries





Isuzu Trooper>> Engines>> Electric equipment and capital repairs of engines>> Electric equipment of engines>> System of launch of the engine>> Starter

3.2.1.6.2. Starter

GENERAL INFORMATION

4-CYLINDER ENGINES

Removal of a starter (4-cylinder engines)

1 – a conclusion In
2 – a conclusion With
3 – bolts and nuts of fastening
4 – starter

Removal and installation

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. If necessary disconnect and pick up the phone of system of recirculation.
3. Turn off bolts of fastening of a starter to the engine and remove a starter.
4. Establish a starter.
5. Attach wires.
6. Attach a tube of system of recirculation.
7. Connect the battery to weight.

6-CYLINDER ENGINES

Removal of a starter (6-cylinder engines)

1 – a conclusion In
2 – conclusion of L
3 – bolts and nuts of fastening
4 – starter

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Lift the car and establish on supports.
3. Disconnect conducting from a starter, previously having marked each of wires.
4. Turn off bolts of fastening of a starter to the engine.
5. Remove a starter for what displace it down and get from under the car.
6. Establish a starter and laying (if are provided).
7. Attach conducting to a starter.
8. Lower the car.
9. Connect the battery to weight.