Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
3. Engines
   3.1. Specifications of the engine and adjusting works
   3.2. Electric equipment and capital repairs of engines
      3.2.1. Electric equipment of engines
         3.2.1.1. Ignition coil
            3.2.1.1.1. Check
            3.2.1.1.2. Removal and installation
         3.2.1.2. Ignition block
         3.2.1.3. The induction sensor of ignition for V6 engines
         3.2.1.4. Ignition distributor
         3.2.1.5. System of a charge of the battery
         3.2.1.6. System of launch of the engine
      3.2.2. Capital repairs of engines
   3.3. Diesel engine 2,8 liters
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries





Isuzu Trooper>> Engines>> Electric equipment and capital repairs of engines>> Electric equipment of engines>> Ignition coil>> Removal and installation

3.2.1.1.2. Removal and installation

GENERAL INFORMATION

The coil of ignition of the Trooper, Trooper II and Amigo/Jazz cars with engines 4ZD1 and 4ZE1

1 – fastening bolts
2 – positive and negative conclusions
3 – high-voltage wire

Removal

PERFORMANCE ORDER
The Trooper, Trooper II and Amigo/Jazz cars with engines 4ZD1 and 4ZE1
1. Disconnect the battery from weight, disconnect the conducting socket on the coil.
2. Unscrew two screws and remove the coil assembled.
3. Install the coil of ignition and wrap screws.
4. Connect the battery to weight, attach the socket.
The Trooper, Trooper II and Amigo cars with V6 engines
5. Disconnect the battery from weight.
6. Disconnect conducting sockets.
7. Turn off bolts of fastening and remove the coil.

Installation

PERFORMANCE ORDER
1. Install the coil, tighten fastening bolts with m 27 N.' moment.
2. Connect all sockets and connect the battery to weight, check work of ignition.