Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
   2.1. Data on identification of the car
   2.2. General data of engines
   2.3. THAT the Trooper/Bighorn cars with the diesel engine
   2.4. Instructions on leaving
      2.4.1. Air filter
      2.4.2. Fuel filter (petrol engines)
      2.4.3. Fuel filter (diesel engines)
      2.4.4. Draining of the water which collected in fuel system of the diesel engine
      2.4.5. Compulsory system of ventilation of a case (PCV system)
      2.4.6. A tank for catching of vapors of gasoline
      2.4.7. Features of check of system of catching of vapors
      2.4.8. Rechargeable battery
      2.4.9. Drive belts
         2.4.9.1. Check and adjustment of a tension
         2.4.9.2. Definition of a condition of belts with wedge-shaped section
         2.4.9.3. Belts with a corrugated stream
      2.4.10. Cooling system
      2.4.11. Air conditioning system
      2.4.12. Screen wiper
      2.4.13. The recommended brands of fuel and oil
      2.4.14. Care of the manual transmission or automatic transmission
      2.4.15. Check of level of oil or liquid
      2.4.16. Oil replacement
      2.4.17. Case of the transfer case
      2.4.18. Reducer of the back bridge
      2.4.19. Cooling liquid
      2.4.20. Main brake cylinder
      2.4.21. Main cylinder of a hydraulic actuator of coupling
      2.4.22. Nutritious tank of the power steering
      2.4.23. Reducer of the steering mechanism
      2.4.24. Lubricant of a running gear
      2.4.25. Body lubricant
      2.4.26. Lubricant of the mechanism of the emergency brake
      2.4.27. Lubricant of draft of the drive of a butterfly valve
      2.4.28. Gear shifting lever lubricant
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries





Isuzu Trooper>> Maintenance>> Instructions on leaving>> Drive belts>> Belts with a corrugated stream

2.4.9.3. Belts with a corrugated stream

GENERAL INFORMATION

The correct prileganiye of a belt with a corrugated stream to a pulley

1 – belt

2 – pulley

3 – correct

4 – wrong

5 – a belt with a 6-dorozhechny belt

Since 1989 V6 engines began to be completed with belts with a corrugated stream. The tension of a belt is provided with a natyazhitel with the sprung roller. The indicator tag on a mobile part of a natyazhitel has to be in limits of the groove provided in a motionless part of a natyazhitel.

Removal

PERFORMANCE ORDER
To take off a belt insert the handle with a graggers in square vents of a natyazhitel and turn so that the belt slid off pulleys. Mark the route of a proleganiye of a belt to facilitate installation.