Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
   2.1. Data on identification of the car
   2.2. General data of engines
   2.3. THAT the Trooper/Bighorn cars with the diesel engine
   2.4. Instructions on leaving
      2.4.1. Air filter
      2.4.2. Fuel filter (petrol engines)
      2.4.3. Fuel filter (diesel engines)
      2.4.4. Draining of the water which collected in fuel system of the diesel engine
      2.4.5. Compulsory system of ventilation of a case (PCV system)
      2.4.6. A tank for catching of vapors of gasoline
      2.4.7. Features of check of system of catching of vapors
      2.4.8. Rechargeable battery
      2.4.9. Drive belts
      2.4.10. Cooling system
      2.4.11. Air conditioning system
      2.4.12. Screen wiper
      2.4.13. The recommended brands of fuel and oil
      2.4.14. Care of the manual transmission or automatic transmission
      2.4.15. Check of level of oil or liquid
      2.4.16. Oil replacement
      2.4.17. Case of the transfer case
      2.4.18. Reducer of the back bridge
      2.4.19. Cooling liquid
      2.4.20. Main brake cylinder
      2.4.21. Main cylinder of a hydraulic actuator of coupling
      2.4.22. Nutritious tank of the power steering
      2.4.23. Reducer of the steering mechanism
      2.4.24. Lubricant of a running gear
      2.4.25. Body lubricant
      2.4.26. Lubricant of the mechanism of the emergency brake
      2.4.27. Lubricant of draft of the drive of a butterfly valve
      2.4.28. Gear shifting lever lubricant
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries

Isuzu Trooper>> Maintenance>> Instructions on leaving>> Fuel filter (diesel engines)

2.4.3. Fuel filter (diesel engines)


The fuel filter is mounted near the battery.

Removal and installation

1. Execute actions for a decompression of fuel system. Disconnect the battery from weight.
2. Disconnect the moisture separator wire socket.
3. By means of a special key remove the filter.


At dismantle keep in mind that from the boss of the filter fuel can spill.

4. Merge fuel from the boss of the filter and get the sensor from the boss.
5. Establish a new sealing ring of the sensor, moisten it with diesel fuel and install the sensor back in a cartridge.
6. Establish a new sealing ring of the boss of the filter, moisten it with diesel fuel. Establish a cartridge so that the sealing ring rested against the condensed surface, then tighten the filter on 2/3 turns.
7. Attach a sensor wire.
8. Fill a cartridge with fuel for what press 30–40 times a cap of the pump of pumping of fuel in the top part of the boss. In process of filling of the boss the effort of pumping will increase.
9. Start the engine and check existence of a leak of fuel in the condensed places of the filter.