Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
   2.1. Data on identification of the car
   2.2. General data of engines
   2.3. THAT the Trooper/Bighorn cars with the diesel engine
   2.4. Instructions on leaving
      2.4.1. Air filter
      2.4.2. Fuel filter (petrol engines)
      2.4.3. Fuel filter (diesel engines)
      2.4.4. Draining of the water which collected in fuel system of the diesel engine
      2.4.5. Compulsory system of ventilation of a case (PCV system)
      2.4.6. A tank for catching of vapors of gasoline
      2.4.7. Features of check of system of catching of vapors
      2.4.8. Rechargeable battery
      2.4.9. Drive belts
      2.4.10. Cooling system
      2.4.11. Air conditioning system
      2.4.12. Screen wiper
      2.4.13. The recommended brands of fuel and oil
      2.4.14. Care of the manual transmission or automatic transmission
      2.4.15. Check of level of oil or liquid
      2.4.16. Oil replacement
      2.4.17. Case of the transfer case
      2.4.18. Reducer of the back bridge
      2.4.19. Cooling liquid
         2.4.19.1. Check of level of cooling liquid
         2.4.19.2. Replacement of cooling liquid
      2.4.20. Main brake cylinder
      2.4.21. Main cylinder of a hydraulic actuator of coupling
      2.4.22. Nutritious tank of the power steering
      2.4.23. Reducer of the steering mechanism
      2.4.24. Lubricant of a running gear
      2.4.25. Body lubricant
      2.4.26. Lubricant of the mechanism of the emergency brake
      2.4.27. Lubricant of draft of the drive of a butterfly valve
      2.4.28. Gear shifting lever lubricant
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries





Isuzu Trooper>> Maintenance>> Instructions on leaving>> Cooling liquid>> Check of level of cooling liquid

2.4.19.1. Check of level of cooling liquid

GENERAL INFORMATION

Broad tank

 

Level is checked on tags on a broad tank. On the cold engine level has to be lower than the mark MIN, and on warmed up – between the marks MIN and MAX. If the broad tank is not provided, then it is necessary to check level, having opened a radiator mouth stopper, previously having allowed the engine to cool down. If necessary finish level so that it was in 13,0 mm from edge of a mouth.