Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
   2.1. Data on identification of the car
   2.2. General data of engines
   2.3. THAT the Trooper/Bighorn cars with the diesel engine
   2.4. Instructions on leaving
      2.4.1. Air filter
      2.4.2. Fuel filter (petrol engines)
      2.4.3. Fuel filter (diesel engines)
      2.4.4. Draining of the water which collected in fuel system of the diesel engine
      2.4.5. Compulsory system of ventilation of a case (PCV system)
      2.4.6. A tank for catching of vapors of gasoline
      2.4.7. Features of check of system of catching of vapors
      2.4.8. Rechargeable battery
      2.4.9. Drive belts
      2.4.10. Cooling system
      2.4.11. Air conditioning system
      2.4.12. Screen wiper
      2.4.13. The recommended brands of fuel and oil
      2.4.14. Care of the manual transmission or automatic transmission
      2.4.15. Check of level of oil or liquid
      2.4.16. Oil replacement
      2.4.17. Case of the transfer case
      2.4.18. Reducer of the back bridge Check of level of oil in a reducer of the back bridge Replacement of oil in a reducer of the back bridge
      2.4.19. Cooling liquid
      2.4.20. Main brake cylinder
      2.4.21. Main cylinder of a hydraulic actuator of coupling
      2.4.22. Nutritious tank of the power steering
      2.4.23. Reducer of the steering mechanism
      2.4.24. Lubricant of a running gear
      2.4.25. Body lubricant
      2.4.26. Lubricant of the mechanism of the emergency brake
      2.4.27. Lubricant of draft of the drive of a butterfly valve
      2.4.28. Gear shifting lever lubricant
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries

Isuzu Trooper>> Maintenance>> Instructions on leaving>> Reducer of the back bridge>> Replacement of oil in a reducer of the back bridge Replacement of oil in a reducer of the back bridge


Traffic jams of a control (filling) and drain opening in the case of a reducer of the back bridge

1 – stopper of a control opening

2 – stopper of a drain opening

1. Lift the car completely and establish on 4 supports. Substitute the pallet under the reducer case.
2. If the drain stopper is provided, turn out it if is not present, then turn off bolts of fastening of a cover of the case of a reducer. Hook a cover and merge oil in the pallet. It is better to suck away oil the pump (if is available).
3. Wipe differential and examine. Clear a cover and the privalochny surface of the case, apply sealant.
4. Establish new laying, a cover, turn and tighten bolts. Fill in oil (previously having wrapped a stopper of a drain opening – in the presence) through a control opening.
5. Bring oil level to bottom edge of an opening and wrap a stopper. Lower the car.