Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
   1.1. Introduction
   1.2. Dashboard
   1.3. Ignition lock
   1.4. The combined switch
   1.5. Alarm light system
   1.6. Dashboard switches
   1.7. Cruise control
   1.8. Devices and control lamps
   1.9. Control levers
   1.10. Windows and window regulators
   1.11. Illumination of salon
   1.12. Electric digital watch
   1.13. Governing bodies of heating and fan or conditioner
   1.14. Driving
   1.15. Production of air from fuel system
   1.16. Depletion of a water separator
   1.17. Regular checks
   1.18. Service of the air filter
   1.19. Replacement of engine oil
   1.20. Block of safety locks
   1.21. Technical characteristics
2. Maintenance
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries

беби дентал

Isuzu Trooper>> Maintenance instruction>> Control levers

1.9. Control levers


Lever of the emergency brake

For work as the emergency brake extend the lever.

To release a brake, pull the handle on yourself and unblock, rotating clockwise, then shift forward.

During driving the emergency brake has to be always completely unblocked in order to avoid an overheat and damage of the parking brake.

Gear shifting lever

The lever operates operation of completely synchronized transmission.

The scheme of switchings is on a lever head.

Include a backing only at the motionless car.

At the included ignition and the included backing backing headlights light up.

Lever of switching of the transfer case of transfers

The transfer case of transfers in cars with the connected all-wheel drive allows the driver to switch from the drive to back wheels on the four-wheel drive.

The scheme of switching on the lever button.

Switching levers for automatic and distributing transmissions

The automatic four-speed transmission with electronic control and the transfer case of transfers is switched by the switching lever, the switch of an overdrive gear and the power / norm switch.