Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
   1.1. Introduction
   1.2. Dashboard
   1.3. Ignition lock
   1.4. The combined switch
   1.5. Alarm light system
   1.6. Dashboard switches
   1.7. Cruise control
   1.8. Devices and control lamps
   1.9. Control levers
   1.10. Windows and window regulators
   1.11. Illumination of salon
   1.12. Electric digital watch
   1.13. Governing bodies of heating and fan or conditioner
   1.14. Driving
   1.15. Production of air from fuel system
   1.16. Depletion of a water separator
   1.17. Regular checks
   1.18. Service of the air filter
   1.19. Replacement of engine oil
   1.20. Block of safety locks
   1.21. Technical characteristics
2. Maintenance
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries





Isuzu Trooper>> Maintenance instruction>> Cruise control

1.7. Cruise control

GENERAL INFORMATION

The automatic cruise control works if the switch is in the provision of "ON".

In the provision of "OFF" the system does not work.

"SET" – press the button and at achievement of desirable speed release it.

Acceleration

Accel – acceleration.

For acceleration transfer the switch to position of Resume-Accel.

At achievement of desirable speed release, the gained speed automatically remains.

Gradual acceleration: and again to release short switching (less than 1 second) to "Resume/Assel" (1 step), speed with each step increases on 1,6 km/h.

Delay

"Coast" – a setup.

Press the button until speed decreases to desirable parameter.

When desirable speed is reached, release the button.

Gradual delay

Press (less than 1 sec.) the button and again release (1 step), with each step speed decreases by 1,6 km/h.

Renewal

"Resume" – return.

Transfer the lever to situation "Resume/Accel", originally set speed comes back.