Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
   1.1. Introduction
   1.2. Dashboard
   1.3. Ignition lock
   1.4. The combined switch
   1.5. Alarm light system
   1.6. Dashboard switches
   1.7. Cruise control
   1.8. Devices and control lamps
   1.9. Control levers
   1.10. Windows and window regulators
   1.11. Illumination of salon
   1.12. Electric digital watch
   1.13. Governing bodies of heating and fan or conditioner
   1.14. Driving
   1.15. Production of air from fuel system
   1.16. Depletion of a water separator
   1.17. Regular checks
   1.18. Service of the air filter
   1.19. Replacement of engine oil
   1.20. Block of safety locks
   1.21. Technical characteristics
2. Maintenance
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries

Isuzu Trooper>> Maintenance instruction>> Dashboard switches

1.6. Dashboard switches


Light switch

Turn the switch to the first fixed situation to include parking fires, back dimensional, illumination of registration plate and the dashboard.

Headlights join if to turn the switch to the second fixed situation.

Switch of adjustment of a tilt angle of headlights

0 – only driver or driver and passenger

1 – are busy all of sitting

2 – are busy all of sitting and the maximum loading

3 – only driver and maximum loading

At the included headlights and the working engine it is necessary to adjust a tilt angle of headlights the relevant provision of the switch according to loading of the car.

Idling regulator

After launch of the cold engine turn of the regulator clockwise it is possible to increase idling rotation frequency, ensuring bystry and normal functioning of the engine.

At the movement the regulator has to be in a starting position.


Press the button to include a lighter. As soon as the lighter is warmed, it will jump aside back and it can use.

Switch of back heating

At the included heating by turn of the switch back deflectors which give warm air open.

Power of an air stream is regulated by two positions.

Switch of heating of back glass

At the included ignition press the top part of the switch to include heating of back glass. The control bulb on the dashboard will light up. As soon as the review through back glass is reached, it is recommended to switch off heating of back glass. If it remains included, it is excess and vain load of the accumulator.

Switch of the janitor of back glass

To include the janitor, press the lower part that to switch off him – on top.

Do not use the janitor at dry glass not to scratch glass.

Do not include system when freezing the janitor since it can cause malfunctions in all system of purification of glasses.

Switch of system of windscreen washer

If to press the top part of the switch it is more, than for purification of glasses, then on back glass the washing liquid is sprayed.

If to press the lower part of the switch, then liquid is sprayed on glass, and the janitor does not join.

Tank of system of windscreen washer – back glass

The tank is in the left sidewall behind a wheel niche. It can be filled only with clear water and liquid for purification of glasses.

System of washing of headlights

By pressing the switch in the average console water or washing liquid is sprayed on headlights.

Switch of fog lights

For inclusion of fog lights press the top part of the switch. The switch of light of headlights at the same time has to be in a position 1 or 2. For switching off of fog lights press the lower part of the switch.

Back fog lights: at the switched-on switch of light of headlights press the top part of the switch.

Electroadjustable shock-absorbers

The three-position switch on the average console changes position of shock-absorbers.

"HARD" – rigid depreciation

"NORM" – normal depreciation

"SOFT" – low depreciation

During the movement it is possible to change the depreciation mode at any time.

If to press the switch before the ignition key is in the family way of "ON", then change of the mode of depreciation will be occurs only in the provision of "ON".

Switch of heating of forward sitting

Heating of sitting can be included if the ignition key in the provision of "ON".

Power of heating can be set pressing of the top or lower part of the HI switch – the high power, LO – low power.

At the included heating the HI or LO indicator lights up.

For shutdown once again press the switch; it is possible to use heating of forward sitting only at the working engine.

"External air / circulation in salon" switch

If to press the top part of the switch, fresh air outside does not arrive, there is only a circulation in salon (for bystry warming up that dust did not get).

That fresh air outside arrived, press the lower part of the switch.

Switch of system of a bystry warming up of the engine

If at the working engine the top part of the switch is pressed, the control bulb lights up. The system of a bystry warming up reduces a phase of operation of not heated-up engine, improves efficiency.

The system does not join if ambient temperature is above 8 °C, or is automatically disconnected after achievement of temperature in 8 °C. The control bulb at the same time dies away.

If to press the lower part of the switch, the system of a bystry warming up is disconnected manually.


When the system of a bystry warming up works, accurate decrease in a dynamic characteristics is felt. In this phase the dark exhaust is also inevitable.

It is recommended to coordinate a dynamic characteristics with system during a warming up.

In special situations, for example, at an abrupt congress from a garage or at the dangerous intersection if acceleration is necessary, it is necessary to disconnect system of a bystry warming up manually.

Frequent use of system of a bystry warming up is recommended.