Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
   1.1. Introduction
   1.2. Dashboard
   1.3. Ignition lock
   1.4. The combined switch
   1.5. Alarm light system
   1.6. Dashboard switches
   1.7. Cruise control
   1.8. Devices and control lamps
   1.9. Control levers
   1.10. Windows and window regulators
   1.11. Illumination of salon
   1.12. Electric digital watch
   1.13. Governing bodies of heating and fan or conditioner
   1.14. Driving
   1.15. Production of air from fuel system
   1.16. Depletion of a water separator
   1.17. Regular checks
   1.18. Service of the air filter
   1.19. Replacement of engine oil
   1.20. Block of safety locks
   1.21. Technical characteristics
2. Maintenance
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries





Isuzu Trooper>> Maintenance instruction>> The combined switch

1.4. The combined switch

GENERAL INFORMATION

The handle of the combined switch (it is specified by an arrow) regulates lamps of the alarm system, the switch of passing beam, inclusion of driving beam is interrupted, and also screen wipers and windscreen washer are regulated.

Alarm system

Pressing the lever up or down lamps of the alarm system and a control bulb on the dashboard which flashes with the same interval join. Return of the lever to a starting position happens automatically upon transition of steering to situation "directly".

Passing / driving beam

On yourself or from yourself you switch by the movement of the lever system to passing or driving beam.

The control bulb of driving beam on the dashboard lights up at inclusion of driving beam.

Inclusion of driving beam

If the switch is in the first situation or in the provision of "AUS", the movement of the lever on itself or its otpuskaniye turns on and switched off driving beam.

Windshield screen wiper switch

1 – it is switched off

2 – low speed

3 – high speed

4 – faltering work

Turn of the lever clockwise the screen wiper joins on two speeds. First speed low, second higher.

Faltering functioning of a screen wiper is ensured by turn of the lever counterclockwise in the provision of "INT".


Prevention

Do not include a screen wiper at a dry windshield since it can scratch glass. If the janitor froze, it cannot also be included since it leads to failure of all system.


Washer of glasses

Pressing the button on the lever on a windshield sprays the washing liquid.

The tank with liquid for washing of headlights (it is specified by an arrow) can fill only with clear water and glass cleaning liquid.