Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
   1.1. Introduction
   1.2. Dashboard
   1.3. Ignition lock
   1.4. The combined switch
   1.5. Alarm light system
   1.6. Dashboard switches
   1.7. Cruise control
   1.8. Devices and control lamps
   1.9. Control levers
   1.10. Windows and window regulators
   1.11. Illumination of salon
   1.12. Electric digital watch
   1.13. Governing bodies of heating and fan or conditioner
   1.14. Driving
   1.15. Production of air from fuel system
   1.16. Depletion of a water separator
   1.17. Regular checks
   1.18. Service of the air filter
   1.19. Replacement of engine oil
   1.20. Block of safety locks
   1.21. Technical characteristics
2. Maintenance
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries





Isuzu Trooper>> Maintenance instruction>> Replacement of engine oil

1.19. Replacement of engine oil

GENERAL INFORMATION

 

The specialist of Isuzu since she is possible only by means of special pumps has to carry out check of level of oil and its state.

If you have to check most, follow surely existing rules of environmental protection.

In the hot engine unscrew a drain stopper (it is specified by an arrow) in an oil bathtub and merge all oil; then again screw up a stopper.

Fill in the new oil corresponding to the instruction.

When oil is filled in to the top mark in the index of level of oil, start the engine and let's it several minutes work idling.

Then switch off the engine, check oil level.

Do not fill in oil above the maximum mark.

Manual step transmission

Replace oil in the transmission with the transfer case of transfers.

Merge oil, having unscrewed drain traffic jams (D).

Fill in the engine oil specified in the instruction through an opening (L) to the lower edge of an opening.