Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
   1.1. Introduction
   1.2. Dashboard
   1.3. Ignition lock
   1.4. The combined switch
   1.5. Alarm light system
   1.6. Dashboard switches
   1.7. Cruise control
   1.8. Devices and control lamps
   1.9. Control levers
   1.10. Windows and window regulators
   1.11. Illumination of salon
   1.12. Electric digital watch
   1.13. Governing bodies of heating and fan or conditioner
   1.14. Driving
      1.14.1. Switching off of the engine
      1.14.2. Precautionary measures for the diesel engine
      1.14.3. The connected four-wheel drive
      1.14.4. Blocking
      1.14.5. Parking
      1.14.6. Precautionary measures during the movement
      1.14.7. Towage
   1.15. Production of air from fuel system
   1.16. Depletion of a water separator
   1.17. Regular checks
   1.18. Service of the air filter
   1.19. Replacement of engine oil
   1.20. Block of safety locks
   1.21. Technical characteristics
2. Maintenance
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
12. Electrical circuitries





Isuzu Trooper>> Maintenance instruction>> Driving>> The connected four-wheel drive

1.14.3. The connected four-wheel drive

GENERAL INFORMATION

Transfer case of transfers

At cars with the connected all-wheel drive it is possible to switch by means of the transfer case of transfers from the drive to the drive in the movement.

Naves of manual switching (manual mode / automatic equipment)

Pass the first 300 km only in situation 2H (the drive on back wheels) with the blocked naves correctly to roll driving elements of forward wheels.

The car has to pass every month at least 20 km with the blocked naves to provide sufficient lubricant of driving elements of forward wheels.