Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
   11.1. Main malfunctions of coupling
   11.2. Main malfunctions of the manual transmission
   11.3. Main malfunctions of the driveshaft
   11.4. Main malfunctions of steering and suspension bracket
   11.5. Main malfunctions of the steering mechanism
   11.6. The main malfunctions of the steering mechanism with the hydraulic booster
   11.7. Main malfunctions of brakes
   11.8. Characteristic malfunctions of the engine and ways of elimination
   11.9. Characteristic malfunctions in the engine cooling system
   11:10. Characteristic malfunctions of a belt of the drive with a corrugated profile
   11:11. Characteristic malfunctions of a power supply system (carburetor engines)
   11:12. Characteristic malfunctions of signals of turn and emergency stop 11_13.htm
12. Electrical circuitries





Isuzu Trooper>> Diagnostics of malfunctions>> Characteristic malfunctions of signals of turn and emergency stop 11_13.htm

11:12. Characteristic malfunctions of signals of turn and emergency stop

GENERAL INFORMATION

As a rule, malfunction of indexes of turn is eliminated by replacement of the fused lamps. Sometimes malfunction of the switch on a steering column is a cause of failure. For elimination of such malfunction it is necessary to address in a workshop.

MALFUNCTION
WAY OF ELIMINATION
All lamps of indexes of turn shine, but the blinking is absent Replace the breaker.
All lamps of indexes of turn do not burn Check a safety lock, replace the fused safety lock. Check replacement of lamps by obviously serviceable. Check existence of breaks, short circuits and bad contact with weight.
Breakers on the one hand do not work Check lamps. Check connection with weight in both indexes.
One of indexes does not work Check and replace a lamp. Check corrosion of the boss of a lamp, smooth out contacts. Check contact of the boss with weight.
Blinking with the increased or low frequency Check a lamp of the faulty index, the power of a lamp has to correspond to recommended. If a blinking rare, then instead of a standard lamp the lamp with a smaller power and vice versa is established. Check a condition of the boss of a lamp, remove corrosion.
Control lamps of indexes of turn do not blink Check serviceability of indexes. Check serviceability of control lamps for dashboards. Check the interruption block replacement by obviously serviceable.
One of control lamps does not burn If 1 control index is provided, then check whether headlights and lamps on the party to which the faulty control signal belongs burn. As a rule, the wrong installation of mnogonitevy lamps in those lamps in whom the signal of braking is combined with dimensional light and the index of turn is a cause of failure of a control lamp. If 2 control indexes are provided, then check lamps on the party to which the faulty control signal belongs, check a control lamp and check the interruption block by replacement by obviously serviceable.