Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
8. Brake system
9. Body
10. Body electric equipment
11. Diagnostics of malfunctions
   11.1. Main malfunctions of coupling
   11.2. Main malfunctions of the manual transmission
   11.3. Main malfunctions of the driveshaft
   11.4. Main malfunctions of steering and suspension bracket
   11.5. Main malfunctions of the steering mechanism
   11.6. The main malfunctions of the steering mechanism with the hydraulic booster
   11.7. Main malfunctions of brakes
   11.8. Characteristic malfunctions of the engine and ways of elimination
   11.9. Characteristic malfunctions in the engine cooling system
   11:10. Characteristic malfunctions of a belt of the drive with a corrugated profile
   11:11. Characteristic malfunctions of a power supply system (carburetor engines)
   11:12. Characteristic malfunctions of signals of turn and emergency stop 11_13.htm
12. Electrical circuitries





Isuzu Trooper>> Diagnostics of malfunctions>> Characteristic malfunctions of a belt of the drive with a corrugated profile

11:10. Characteristic malfunctions of a belt of the drive with a corrugated profile

GENERAL INFORMATION

REASON
WAY OF ELIMINATION
Peeling of a textile cover of a belt from a basis (formation of cracks and gaps on an external surface of a belt)
Height of flutes of a pulley is less than minimum Replace the pulleys which are not meeting requirements of specifications.
Zadevany an external surface of a belt for a motionless subject Eliminate a zadevaniye.
The overheat causing aging of a belt Replace a belt.
Rupture of a fabric cover Replace a belt.
During the operation of the engine unpleasant sounds high (peep or squeal) or low tone are listened
Slipping of a belt Adjust a tension.
Wear of bearings Establish the reason and eliminate.
Belt distortion (shift of the plane of pulleys) Combine the planes of pulleys.
Discrepancy of a belt and pulley Establish a belt of the recommended type.
Vibrations of the conducted details Define faulty details and repair.
The vibrations caused by a resonance Adjust a tension or replace a belt.
Peeling from a belt of one or several paths

Hit in flutes of pulleys of third-party particles

Clean pulleys.
Violation of installation of a belt

Replace a belt.

Load of a belt exceeds admissible Adjust a tension.
Insufficient durability of a belt Replace a belt.
Wear of paths of a belt (paths rest against pulley flutes)
Shift of the plane of pulleys

Combine pulleys.

Discrepancy of a profile of a belt and flutes of pulleys Replace a belt.
Abrasive wear Replace a belt.
Corrosion of pulleys Remove corrosion.
Sharp edges of a pulley (or jags on edges) Replace a belt.
Rubber aging Replace a belt.
Longitudinal cracks (between paths)
Soskakivaniye of belt paths from pulley flutes Replace a belt.
Rupture of material of a belt in the place of a binding layer edges of flutes Replace a belt.
Slipping of a belt
Insufficient tension Adjust a tension.
Influence of the substances reducing friction (a belt wipe dirty rags, hit of oil and okhlazhdayushche liquid) Replace a belt and clear pulleys.
Destruction of bearings of the conducted details Replace the conducted bearings.
Brightness of a belt and hardening from an overheat and overloads Replace a belt.
Uneven wear of a belt (the belt descends from flutes, making the axial movement)
Insufficient tension Adjust a tension.
The sizes of a pulley does not correspond to standard Replace pulleys.
Hit in flutes of a pulley of third-party particles Clear a pulley.
Excessive speed of a belt Avoid intensive dispersals.
Shift of the plane of pulleys Combine pulleys.
Discrepancy of a profile of flutes of a pulley and belt Establish a belt of the recommended type.
Deformation of a framework of a belt Replace a belt.
Break of a belt (before installation of a new belt find the reason and eliminate)
Excessive tension Replace and adjust according to the instruction.
Belt material damage in the course of installation Replace a belt.
Slipping of a belt Replace a belt.
Strong shift of the planes of pulleys Combine pulleys in one plane.
Destruction of an arm, pulley or bearings Replace a belt and the failed details.
Destruction of edges of a belt (deleting of a cover of a belt on edges, or peeling of material from a belt basis)
The tension of a belt exceeds norm Adjust a tension.
Shift of the planes of pulleys Combine pulleys in one plane.
Zadevaniye of belt edges for a motionless subject Eliminate a zadevaniye.
Unevenness of flutes of pulleys Replace a pulley.
The design of a pulley does not correspond to standard Replace a pulley.
Insufficient durability of a belt Replace a belt.
Irregular cracks on combs of paths
Diameters of a pulley there is less standard Replace a pulley.
The belt overheat which was the reason of hardening Establish the reason of an overheat and eliminate.
Thickness of a belt exceeds standard Replace a belt.
The tension of a belt exceeds norm Adjust a tension.