Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
8. Brake system
9. Body
10. Body electric equipment
   10.1. System of heating and air conditioning
   10.2. Receiver
   10.3. Electric motor of a screen wiper of a windshield, draft of the drive of brushes
   10.4. Electric motor of a screen wiper of back glass
   10.5. Devices and switches
   10.6. Cruise control
   10.7. Unblocking device
   10.8. Devices of protection against overloads
      10.8.1. Safety locks
      10.8.2. Fusible crossing points of wires (insert)
      10.8.3. Automatic switches of loading
      10.8.4. Flashing signaling devices
11. Diagnostics of malfunctions
12. Electrical circuitries





Isuzu Trooper>> Body electric equipment>> Devices of protection against overloads

10.8. Devices of protection against overloads

10.8.1. Safety locks

GENERAL INFORMATION

The block of safety locks on a part of cars is under a forward partition, near a steering wheel. Access to safety locks is provided with tilting of the block down. On some cars the block of safety locks is mounted on the right side under a front part of the forward panel and access to it is provided through a window in the forward panel. The safety lock has knife conclusions and can be inserted by fingers.

All safety locks calculated on identical current are interchanged. The nominal rate of current is put on a safety lock in the form of number or color marking. Establish only that safety lock which current corresponds specified near a nest. It is easy to find the fused safety lock visually, or by check by an ohmmeter.

Check of a safety lock

PERFORMANCE ORDER
For check of the fused safety lock get it and examine (1 – the place of check). Include a chain and between the specified points (2) connect a control lamp.

Color marking of safety locks

5A
yellowish-brown
10A
red
20A
yellow
25A
white