Isuzu Trooper>> Body electric equipment>> Unblocking device

10.7. Unblocking device


1. Press a brake pedal. If the pedal completely comes back to a starting position, then measure pedal height from a body floor. Release bolts of fastening of the switch of a signal of braking and a lock-nut of a pusher of the switch. Adjust the provision of a pusher so that brake pedal height from a body floor was equal to 154 mm.
2. Adjust the provision of an end face of the switch so that at a reset the end face slightly rested against the rubber limiter on the brake pedal lever. Carefully turn the switch until the free wheeling of a pusher does not disappear.