Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
8. Brake system
9. Body
10. Body electric equipment
   10.1. System of heating and air conditioning
   10.2. Receiver
   10.3. Electric motor of a screen wiper of a windshield, draft of the drive of brushes
   10.4. Electric motor of a screen wiper of back glass
   10.5. Devices and switches
      10.5.1. Guard of devices
      10.5.2. Speedometer
      10.5.3. Index of level of fuel
      10.5.4. Fuel level sensor
      10.5.5. Forward panel
         10.5.5.1. Average section of the forward panel
      10.5.6. Windshield screen wiper switch
      10.5.7. Switch of a screen wiper of back glass
      10.5.8. Switch of headlights
      10.5.9. Switch of light of headlights
      10.5.10. Ignition switch
      10.5.11. Speedometer drive cable
      10.5.12. Light devices
      10.5.13. Devices of the light alarm system
      10.5.14. The list of the lamps applied in the Trooper/Bighorn car
      10.5.15. The list of the lamps applied in the Rodeo car
   10.6. Cruise control
   10.7. Unblocking device
   10.8. Devices of protection against overloads
11. Diagnostics of malfunctions
12. Electrical circuitries


заменить для бентли колодки тут



Isuzu Trooper>> Body electric equipment>> Devices and switches>> Forward panel

10.5.5. Forward panel

AMIGO/MU/JAZZ CARS

Removal


PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove the receiver and handles of management of a heater.
3. Remove the decorative panel of a guard of devices.
4. Remove a side ventilating nozzle, having hooked the screw-driver.
5. Remove a guard of devices and a nozzle of defrosting.
6. Remove air ducts and a heater.
7. Remove a steering wheel and a steering shaft and a column.
8. Remove the top cover of the panel and the forward panel.

Installation

PERFORMANCE ORDER
1. Install the forward panel and the top cover of the panel.
2. Establish a column, a steering shaft and a steering wheel.
3. Establish air ducts and a heater.
4. Establish a guard of devices and a nozzle of defrosting of side glass.
5. Establish a side ventilating nozzle.
6. Install the decorative panel of a guard of devices.
7. Install the receiver and handles of management of a heater.
8. Connect the battery to weight.

TROOPER/BIGHORN CARS

1 – a tray of a combination of devices (is established on a part of cars)
1a – a combination of devices
2 – decorative cover of a guard of devices
3 – details of a guard of devices
4 – glove box
5 – receiver
6 – lattice, ventilating nozzle and nozzle of defrosting of side glass
7 – bolts
8 – forward panel

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove a tray and a combination of devices (is established on a part of cars).
3. Remove the decorative panel and a guard of devices.
4. Remove the receiver and a glove box (if it is provided).
5. Remove a lattice of a side nozzle of an obduv and defrosting.
6. Unscrew 10 screws and remove the forward panel.

Installation

PERFORMANCE ORDER
1. Install the forward panel, wrap screws.
2. Establish a lattice of a side nozzle of an obduv and defrosting.
3. Install the receiver and a glove box (if it is provided).
4. Establish a guard of devices and the decorative panel.
5. Establish a combination of devices and a tray.
6. Connect the battery to weight.

RODEO/PASSPORT CARS

1 – steering wheel and details of a decorative casing
2 – lattices and decorative slips
3 – cover of a guard of devices
4 – guard of devices
5 – decorative casing of a guard of devices
6 – cowl lock drive button
7 – lower cover
8 – block of safety locks
9 – side guard
10 – processor block
11 – receiver panel
12 – intensifying section
13 – loudspeaker lattice
14 – glove box
15 – overlays of buttons
16 – false panel
17 – control panel
18 – illumination regulator
19 – forward panel

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove a steering wheel with decorative slips.
3. Hook the screw-driver and remove decorative lattices and the false panel.
4. Turn off nuts of fastening of the forward panel.
5. Remove a guard of devices.
6. Remove a decorative casing of a guard of devices, disconnect a cowl lock drive cable.
7. Remove the lower cover of a wheel and the block of safety locks.
8. Remove a decorative slip and the processor ECM block.
9. Remove average section of the forward panel and the lower intensifying section.
10. Remove decorative lattices and loudspeakers.
11. Remove a glove box, handles of management of a heater and the conditioner.
12. Remove the panel of control levers, disconnect cables.

13. Remove the regulator of illumination and an overlay of the switch.

14. Remove the forward panel, if necessary disconnect sockets.

Installation

PERFORMANCE ORDER
1. Attach sockets, install the forward panel.
2. Install the regulator of illumination and an overlay of the switch.
3. Install the panel of control levers, attach cables.
4. Establish a glove box, handles of management of a heater and the conditioner.
5. Install loudspeakers and decorative lattices.
6. Establish average section of the forward panel and the lower intensifying section.
7. Establish a decorative slip and the processor ECM block.
8. Establish the lower decorative cover of a wheel and the block of safety locks.
9. Establish a decorative cover of a guard of devices, attach a cowl lock drive cable.
10. Establish a guard of devices.
11. Fix the forward panel by nuts.
12. Install decorative lattices and the false panel on the forward panel.
13. Establish a steering wheel and decorative slips.
14. Connect the battery to weight.