Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
8. Brake system
9. Body
10. Body electric equipment
   10.1. System of heating and air conditioning
   10.2. Receiver
   10.3. Electric motor of a screen wiper of a windshield, draft of the drive of brushes
   10.4. Electric motor of a screen wiper of back glass
   10.5. Devices and switches
   10.6. Cruise control
   10.7. Unblocking device
   10.8. Devices of protection against overloads
11. Diagnostics of malfunctions
12. Electrical circuitries


www.ortodont.org



Isuzu Trooper>> Body electric equipment>> Electric motor of a screen wiper of back glass

10.4. Electric motor of a screen wiper of back glass

GENERAL INFORMATION

The electric motor of a cleaner of back glass on the Rodeo/Passport cars

1 – internal panel

2 – electric motor

The electric motor of a cleaner of back glass on the Trooper/Bighorn cars

 
1 – internal panel of a back door
2 – the lever assembled with the brush holder
3 – lever axis details
4 – socket
5 – cleaner electric motor
6 – windscreen washer assembled
7 – jet

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Open a cover of a cargo compartment (or a back door). Remove the decorative panel.
3. Remove the lever assembled with the brush holder.
4. Turn off a lever axis nut on an engine shaft, bolts of fastening of the electric motor and disconnect the socket.
5. Remove the electric motor, having got it from the hatch.

Installation

PERFORMANCE ORDER
1. Install the electric motor.
2. Wrap a lever axis nut on an engine shaft, bolts of fastening of the electric motor, attach the socket.
3. Install the lever assembled with the brush holder.
4. Install the decorative panel.
5. Connect the battery to weight, check work of a screen wiper.