Isuzu Trooper>> Body electric equipment>> Electric motor of a screen wiper of a windshield, draft of the drive of brushes

10.3. Electric motor of a screen wiper of a windshield, draft of the drive of brushes

GENERAL INFORMATION

The screen wiper electric motor on the Trooper/Bighorn cars

1 – brush holder lever assembled
2 – nuts and washers of an axis of the lever
3 – cover of the central hatch
4 – cover of the left hatch
5 – socket
6 – the electric motor with drafts
7 – lock ring
8 – windscreen washer tank

AMIGO/MU/JAZZ AND RODEO/PASSPORT CARS

Removal


PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Turn off bolts of fastening of an arm and raise the electric motor from a casing so to disconnect draft on the spherical hinge. Remove the electric motor.
3. Remove a brush holder lever cap, turn off a nut and remove drafts.
4. Remove a ventilating slip and get levers.

Installation

PERFORMANCE ORDER
1. Establish draft and a ventilating slip.
2. Establish a brush holder lever cap, wrap a nut.
3. Attach thirsts for the spherical hinge, install the electric motor and wrap bolts.
4. Attach sockets, connect the battery to weight.

TROOPER/BIGHORN CARS

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Disconnect from draft the lever assembled with the brush holder.
3. Turn off a lever axis nut.
4. Uncover the central and left hatches.
5. Disconnect the socket from the electric motor.
6. Remove the electric motor assembled with draft.

Installation

PERFORMANCE ORDER
1. Install the electric motor assembled with draft.
2. Attach the socket to the electric motor.
3. Establish covers of the central and left hatches.
4. Install on draft the lever assembled with the brush holder.
5. Connect the battery to weight.