Isuzu Trooper>> Body electric equipment>> Receiver

10.2. Receiver

GENERAL INFORMATION

Details of installation of the receiver on the Amigo/MU/Jazz cars

1 – forward panel
2 – sockets of food and antennas
3 – fastening screws
4 – receiver
5 – arm and bolt

Details of installation of the receiver on the Trooper/Bighorn cars

1 – handle, nut and washer
2 – panel
3 – screws of fastening of the case of the receiver
4 – the socket with wires
5 – screws of fastening of the receiver to an arm
6 – receiver
7 – arm and bolt
8 – screws of fastening of the antenna
9 – antenna assembled
10 – screws of the forward loudspeaker
11 – sockets
12 – forward loudspeaker
13 – screws of the back loudspeaker
14 – back loudspeaker
15 – sockets

AMIGO/MU/JAZZ CARS

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove the forward panel and disconnect sockets of food and antennas.
3. Unscrew screws and get the receiver assembled with an arm.
4. Turn off a bolt and remove an arm.

Installation

PERFORMANCE ORDER
1. Install an arm on the receiver, wrap a bolt.
2. Install the receiver assembled with an arm, wrap screws.
3. Attach sockets of food and antennas, install the forward panel.
4. Connect the battery to weight.

TROOPER/BIGHORN CARS

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove fine tuning handles, turn off nuts and remove washers.
3. Remove a casing, the panel, unscrew screws and remove the receiver.
4. Disconnect all sockets.
5. Remove an arm from the receiver chassis.

Installation

PERFORMANCE ORDER
1. Install an arm on the receiver chassis.
2. Attach sockets.
3. Install a casing, the panel on the receiver, wrap screws.
4. Install fine tuning handles, having dressed washers and having wrapped nuts.
5. Connect the battery to weight.