Isuzu Trooper - Isuzu Trooper
1. Maintenance instruction
2. Maintenance
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and running gear
7. Suspension bracket and steering
8. Brake system
9. Body
10. Body electric equipment
   10.1. System of heating and air conditioning
      10.1.1. Electric motor of the fan of a heater and conditioner
      10.1.2. Additional electric motor of the block of conditioning
      10.1.3. Heater radiator
      10.1.4. Heater gate
   10.2. Receiver
   10.3. Electric motor of a screen wiper of a windshield, draft of the drive of brushes
   10.4. Electric motor of a screen wiper of back glass
   10.5. Devices and switches
   10.6. Cruise control
   10.7. Unblocking device
   10.8. Devices of protection against overloads
11. Diagnostics of malfunctions
12. Electrical circuitries





Isuzu Trooper>> Body electric equipment>> System of heating and air conditioning>> Additional electric motor of the block of conditioning

10.1.2. Additional electric motor of the block of conditioning

GENERAL INFORMATION

TROOPER/BIGHORN CARS

Back heater

1 – conducting
2 – screw
3 – resistor
4 – sealant
5 – screw
6 – arm
7 – screw
8 – arm
9 – screw
10 – ventilating nozzles
11 – screw
12 – brackets
13 – fan casing details
14 – fan casing details
15 – fan casing details
16 – heater radiator
17 – cover
18 – fan electric motor assembled
19 – lock ring
20 – krylchatka

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Merge cooling liquid.
3. Remove a back seat.
4. Disconnect hoses from a heater.
5. Turn off bolts and disconnect the socket with wires.
6. Remove a heater.
7. Sort a heater.
8. Unscrew screws of fastening of a casing and disconnect brackets.
9. Carefully get a casing and details of a casing. Remove the electric motor and a krylchatka.

Installation

PERFORMANCE ORDER
1. If are damaged a sealant, then replace them.
2. Install the electric motor assembled with a krylchatka. Collect a casing.
3. Establish a casing, attach hoses to a heater.
4. Fill in cooling liquid, connect the battery to weight. Be convinced of lack of a leak.